Call us: (03) 9015 7233

Home/Shop/Tactile (TGSI)/Stainless Steel/Stainless Steel Tactile/

Stainless Steel Tactile

$1.00

S26-CR10 Orion
Concentric rings on top surface with a polished rim
and weld-on screw
316 Marine Grade Stainless Steel
Top Dome 25mm
Base of Dome 35mm
Height of Dome 5mm
Stem Diameter 6mm
Stem Length 12mm

Suitable substrates
Most soft substrates with accept a screw attachment
including timber , vinyl flooring , and carpet

– Complies with the 1428.4.1:2009 standard
– Made from Marine Grade 316 stainless steel
– High resistance to corrosion makes it the definitive material to use to withstand the tough weather
– The S26 series is introduced to simplify installation process for soft substrates e.g Timber , Vincyl and Carpet.
– It cuts the cost in the most expensive part of the whole TGSI system installation by up to 30%
– Testing accredition : AS/NZA 4586 Appendix A – Wet Pendulum 4S “W” AS/NZS 4586 Appendix D -Oil Wet Ramp Test “R12”
–Testing accredition : AS/NZS 1428.4 Wet & Sry Luminance Reflectance : Dry 25.1 / Wet 19.5 Mean Contrast Range 10.8-45.5
Installation Tips :
1. Depending upon the installation, a small amount of polyurethene or epoxy glue may be beneficial under the TGSI to give extra hold
Be careful with use, as cleaning off excessive adhesive can be time consuming.
2. Insallation should be strictly in accordance with AS/NZS 1428.1.1:2009. Contact us if any doubt.
3. The standard allow a plus minus 10mm tolerance in installation from the hazard. Avoid positioning studs along substrate joints as
costly post installation “pull outs” will often occur.
4. We recommends the use of template for correct installation. Contact us for quote for template
5. With Scorpio, make certain the head of the screw used is flush or lower than the top of the TGSI dome.

Weight0.03 kg
Material

Stainless Steel

Product Type

S-Series

SKU: S26-CR10 Orion Categories: , Tags: ,

Related Products

Navigation
Viewed

Recently Viewed

Close

Quickview

Close

Categories

My Cart

Close